|
|
shank Ø 13 mm for hole saws Ø 25-105 mm
|
suitable centre drill see Ref.
J.20.1111 or J.20.1127.
|
J.20.1137
|
|
|
|
shank SDS-PLUS for hole saws Ø 25-105 mm
|
suitable centre drill see Ref.
J.20.1111 or J.20.1127.
|
J.20.1123
|
|
Use only without hammer
|
|
|
|
HSS centre drill 8x104 mm
|
For all sandwich materials, non-ferrous materials, plastic, wood and similiar.
|
J.20.1111
|
|
|
|
HM centre drill 8x104 mm
|
For masonry, ceramics, auto claved aerated concrete and similiar.
|
J.20.1127
|
|
|
|
Ejector spring for centre drill
(J.20.1111, J.20.1127)
|
Pushes the core slug out of the hole saw
|
J.20.1005
|
|
|
For using pillar drilling machines
|
|
|
Morse Taper 2 for hole saws Ø 25-105 mm
|
Suitable centre drill see
Ref. J.20.1111 or J.20.1127.
|
J.20.1135
|
|
|
|
Morse Taper 3 for hole saws Ø 25-105 mm
|
Suitable centre drill see
Ref. J.20.1111 or J.20.1127.
|
J.20.1136
|
|
|
For using core drilling machines
|
|
|
Adapter for core drilling machines
|
with Weldonshank 19 mm
|
J.20.1442
|
|
|
|
Adapter for Fein-core drilling machines
|
|
with "Quick In" shank
|
J.20.1443
|
|
|
|
Adapter for Nitto-Kohki-core drilling machines
|
|
with "one touch" shank mm
|
J.20.1444
|
|
|
|
Suitable ejector pins for above mentioned adapters
|
(packing unit: 2 pieces)
|
J.20.1160
|
|
