HC 33
Engineered for:  
Säge
·  Plastics
 
 
 
Ref. reference no. Material length width thickness Pitch TPI Toothing Setting
  Bosch / B&D   in mm   milled ground wavy set raker set conical
G.HC 12 T 101 B HCS 100 7.8 1.45 2.5 10   x     x
G.HC 12 K T 101 AO HCS 76.5 4.7 1.25 1.35 18   x     x
G.HC 12 R T 101 BR HCS 76.5 4.7 1.25 1.35 18   x     x
G.HC 14 T 101 D HCS 100 7.8 1.45 4.0 6   x     x
G.HC 32 T 101 BR HCS 132 7.8 1.45 2.5 10   x     x
G.HC 33 T 301 CD HCS 132 7.8 1.45 2.5 10   x     x
G.HC 34 T 301 DL HCS 132 7.8 1.45 4.0 6   x     x
G.HC 123 T 234 X HCS 100 7.8 1.45 2.5 10   x     x
G.HG 13 T 111 C HCS 100 9.8 1.45 3.0 8 x     x  
G.HW 12 K T 119 BO HCS 76 5 1,0 2,0 22 x   x    
G.HGS 14 T 144 D HCS 100 7.8 1.27 4,0 6   x   x  
G.HGS 24 T 244 D HCS 100 6.5 1.27 4.0 6   x   x  
G.HGS 34 T 344 D HCS 132 7.8 1.27 4.0 6   x   x  
G.K 14 T 127 D HSS 100 7.8 1,0 3.0 8 x     x  
G.K 14 bi T 127 DF Bi-Metal 100 7.8 1,0 3.0 8 x     x  
G.D 1 T 130 Riff HM 80 8.8 0.8 Grit            
G.MG 11 T 118 A HSS 76.5 7.8 1,0 1.2 20 x   x    
G.MG 11 BI T 118 AF Bi-Metal 76.5 7.8 1,0 1.2 20 x   x    
G.MG 12 T 118 B HSS 76.5 7.8 1,0 2 12.5 x   x    
G.MG 12 BI T 118 BF Bi-Metal 76.5 7.8 1,0 2 12.5 x   x    
G.MG 31 BI T 318 AF Bi-Metal 132 9.8 1,0 1.2 20 x   x